|
|
April 17, 2024 / Guohua
Country: China
| Softwood Sawn Timber / Lumber | Demand |
Drying Pinus sylvestris: length 3 meters or 4 meters, thickness 6 cm, width free, monthly requirement is 2,000 cubic meters Quality requirements: moisture content less than 12%, no blue change, thickness more than 6cm, width more than 10cm free width.
|
|
|
July 17, 2023 / Nandhi Woods
Country: India
| Softwood Sawn Timber / Lumber | Demand |
We have demand for sawn pine and spruce wood for our packing supply. Please offer us your quotes. Regards, Nandhi woods Dinesh
|
|
|
April 5, 2022 / TAVA Forest Products
Country: Turkey
| Softwood Sawn Timber / Lumber | Demand |
Looking for supplier of pine and cedar lumber hi@tavaforestproducts.com
|
|
|
January 9, 2022 / Jon Edwards
Country: Canada
| Softwood Sawn Timber / Lumber | Demand |
I am looking to inquire about current cedar timber prices for rough-cut 2x4, 2x8, and 6x6. We are looking to make an order for timbers to be used in building drill pads. Is there a current back order and how much notice for timbers would you require for an order to arrive in middle June of this year...
|
|
|
February 9, 2021 / VA Building
Country: United Arab Emirates
| Softwood Sawn Timber / Lumber | Demand |
Hello sir how are you my name is Azizbek from Uzbekistan and I need pine and spruce timber for using pallet. I write on whatsapp +998914406667. Waiting reply
|
Types of softwood to Place Announcement
Types of softwood
Conifers make up 90% of the total number of trees. They grow in most of Russia - in the middle strip, in Siberia and in the southern part. However, each region is characterized by its own representatives. For example, cedar pine grows mainly in Western Siberia, Primorye, Khabarovsk Territory, larch prevails in the middle strip and in Siberia, fir - in the northeast at an altitude of 1200-2000 m above sea level.
To transport lumber throughout Russia, special loading devices are needed that will allow you to quickly and technologically load large volumes of long cargo into containers.
Pine
Pine grows in most of Russia and covers about ⅙ area. Pine is a very popular breed due to its high quality wood properties, high prevalence and budget price. Shades of wood - from yellow to pinkish. Pine wood is strong, good for processing, absorbs antiseptic and dyes, moderately light in weight. These characteristics make it possible to make lumber from pine for any construction and finishing work.
Fir-tree
Spruce grows in the European part of Russia, in the Urals and in Siberia, where wet and loamy soils. The strength, density and bio-resistance of spruce are practically the same as pine, but due to the presence of a large number of knots, it is more difficult to process. However, the wood had high flexibility and elasticity. Spruce products are easy to polish and planing. The tree is pale yellow in color. The fibers are evenly distributed throughout the mass, so these wood properties produce good musical instruments from the spruce.
Cedar
In our country, cedar, or cedar pine, is common in the northeast of the Russian Plain and in Siberia. The properties of wood make cedar one of the most valuable tree species. Cedar pine wood has a low shrinkage coefficient, high density and decorativeness. It varies in color from gently cream to vanilla. It is most often used to make a carriage, board, less often a bar. Although they cost more, cedar timber houses are a good investment.
Larch
Larch occupies ⅖ of the total area of Russian forests. It grows starting from the eastern part and spreads further north and east. The colour varies from a light, slightly brownish to reddish hue. A pronounced texture is visible on the wood. According to such a property of wood as strength, larch is close to oak, it has few knots, it is resistant to damage by microorganisms, and in water it becomes even stronger. Wood is not very good at machining due to its high resineness.
Fir
Siberian fir grows in the northeast of the European part of the Russian Federation. Unlike other conifers, fir wood has few resin passages, so it is more prone to damage by fungi and microorganisms. It is white, yellow or slightly reddish in color. It looks like a spruce. It is used in structures that are not demanding on loads, mainly in finishing work. Fir houses are warmer.
Juniper
Juniper grows in Russia, ranging from the middle part of European territory to Eastern Siberia, as well as in the north. The swampy has a dark yellow with a green tint, the core has an olive blue. In terms of wood properties, juniper is suitable for construction, but it grows slowly and is very whimsical to environmental conditions. Juniper wood is suitable for making small products, cladding furniture and walls. She is beautiful and smells good.
Yew
Tiss berry grows in the Caucasus and Crimea, and tiss Far Eastern - in the Primorsky Territory and Sakhalin. The yew wood is hard and heavy, it does not rot. It is used for the manufacture of furniture, small souvenirs, decoration of products.
What else do you need to know about conifers?
The right choice of softwood species for the construction or manufacture of products depends on their durability and quality. For construction purposes, pine is more often used in the production of furniture and shipbuilding. Rarer breeds are used to make souvenirs and small items. When building a house, larch is suitable for the foundation, pine for the log house, fir for the decoration, and spruce for the roof.
